|
Clutch/Scattersheild
 |
After 3 years of using McLeod's clutch disk,
it finally started to show some wear. Because of my previous luck with the
product I figured I would use the same thing. |
 |
For a little rotating weight loss, I went
with McLeod's Aluminum Flywheel
After a long talk with the Techs over at McLeod I got the 100 Series disk
that has exceptional holding power and low to no chatter |
|
 |
I welded the sleeve into the Scatter
Shield
|
12-bolt rear end
Moser
 |
Out with the old
8.2-inch 10-bolt |
 |
In with the
31-spline Moser 12-bolt
with 3.55 gears and
Detroit Tru-Trac posi |
Driveshaft
FastShafts
|
 |
Fast Shafts
3-inch aluminum driveshaft with 3150 U-joints. You can see my original to
the right.
FastShafts.com |
Transmission Muncie
|
 |
Muncie 4-speed (Wide ratio M20) |
|
