|
This was the very
first project Leonard at Dominator set
me on. My first day's project was to cut out this firewall and start fabricating
a new one out of 16 gauge. All work is TIG welded
|
  |
I used a cut off wheel
to cut out the stock firewall
I put a brake in the metal, cut, fit and tacked in place |
|
  |
I built a relief for
engine clearance that I adapted to the stock trans tunnel. |
|
  |
This car uses matching
brake and clutch master cylinders from Wilwood so I made a box that lets the
masters sit perpendicular to the rod of the pedal |
|
